-
By 肖恩
-
November 10, 2026
How to Compare Bulk Mattress Bag Quotes per 1,000 Finished Bags
To compare bulk mattress bag quotes, divide the order cost on a common delivery basis by the number of finished bags it buys, then multiply by 1,000. Use one approved bag specification at a time. A low roll price may buy fewer bags, while a one-time setup charge can change which offer costs less on a repeat order.
- 1.Match the finished mattress bag before comparing prices
- 2.Convert bulk mattress bag quotes to a price per 1,000
- 3.Check whole packs, tonnage and the minimum per size
- 4.What to request before releasing the purchase order
- 5.Questions buyers ask about mattress bag quotes
- 6.Catalogs used to check pack-count conventions

Match the finished mattress bag before comparing prices
Send both suppliers the same drawing revision. A queen-size label leaves several questions open. What is the maximum depth of the mattress, including its pillow top? Which end goes into the bag first? How much material must remain at the opening for the closure the packing team uses?
| Quote line | What the buyer should be able to check |
|---|---|
| Finished dimensions | Face width, gusset convention if applicable, usable inside length, opening direction, units and tolerances. Have both suppliers mark these on the same drawing. |
| Film and conversion | Material, nominal single-wall thickness, agreed tolerance, seam location, and any vent, print or closure. A vent hole in a bag and the tear-off line between bags serve different purposes. |
| Supply unit | Finished bags per roll or carton, rolls per carton if applicable, and sellable packs per order. Confirm whether closures and individual wrapping are included. |
| Delivery point | Same currency, destination, order quantity and named delivery basis. Identify packing, freight, duties, taxes and other charges included or still to be priced. |
For example, Danco lists its queen bag 10-3255 at 60 × 9 × 90 inches, with 40 bags per roll. Prism Packaging lists LK Packaging’s queen pillow-top bag KP72 at 60 × 12 × 90 inches, with 25 per roll. Both use 4 mil film. Dividing each roll price by its bag count corrects the sales unit, but the two sizes still need separate fit approval. To specify the bag, use the mattress bag sizing guide.
Convert bulk mattress bag quotes to a price per 1,000
Start with a whole order you could place. Multiply the number of packs by the agreed bags per pack. Add each applicable charge once, whether it is payable to the supplier or the carrier. The example includes goods, quoted freight to the same receiving site and first-run setup. It excludes taxes and other charges. If one bid omits a charge included in the other, get the missing amount before choosing the lower offer.
Comparable cost per 1,000 finished bags = included order cost × 1,000 ÷ quoted finished-bag count. Keep the order total alongside the unit cost so purchasing can see the amount it must budget on that basis.
| Order detail | Offer A | Offer B |
|---|---|---|
| Quoted pack | 40 bags at $78 | 50 bags at $100 |
| Packs and goods total | 250 × $78 = $19,500 | 200 × $100 = $20,000 |
| Freight and first-run setup | $800 + $300 | $400 + $0 |
| First order | $20,600 total, or $2,060 per 1,000 | $20,400 total, or $2,040 per 1,000 |
| Unchanged repeat order | $20,300 total, or $2,030 per 1,000 | $20,400 total, or $2,040 per 1,000 |
B costs $200 less on the first order. A costs $100 less on an identical repeat if setup is waived and all other figures hold. With two orders, B still saves $100 overall. At three orders the totals tie at $61,200. From the fourth identical order, A is cheaper overall. Ask how long the quote is valid and when a change of artwork or size triggers another charge before budgeting for that crossover.

Check whole packs, tonnage and the minimum per size
Suppose a depot needs 1,050 bags. Packs of 40 require 27 packs and deliver 1,080 bags. Packs of 50 require 21 packs and deliver exactly 1,050. Use the delivered count for price per thousand and list the 30 extra bags as stock. If that depot has no use for the extras, its spending to supply the job is the full purchase price. These pack counts illustrate rounding only.
TIAN FENG's mattress bag minimum is one metric ton per specification. The comparison unit of 1,000 bags is not itself an order minimum. To estimate pieces from a mass-based offer, obtain the agreed net mass per finished bag, the weight basis of the quote and a piece-count commitment from the supplier. At a hypothetical 0.20 kg per bag, 1,000 kg ÷ 0.20 kg gives 5,000 bags before pack rounding or agreed delivery tolerance. Cartons, cores and pallets do not belong in that net-film calculation.
A buyer planning 600 kg of one queen specification and 400 kg of another has two subminimum specifications, even though the total is one ton. Ask about the quantities available per size before combining them into an annual budget. Confirm dispatch separately from the production period and specify which approvals start the order clock.
What to request before releasing the purchase order
- Identify every line. Send the drawing revision, trial mattress dimensions, closure, artwork and pounds or kilograms per finished bag if already measured. Ask the supplier to identify any assumptions.
- Ask for both counts. Obtain confirmed bags per sales unit and expected finished bags for the entire order. Record allowable overrun or underrun, how it is billed, and whether the packing list will show the actual pieces shipped.
- Separate one-time charges. Distinguish a sample charge, sample freight, print setup and the shipment of the production order. Record any credit in writing and apply it once.
- Approve fit on the mattress that governs the order. Record whether the bag opens, passes the largest corner and closes without pulling the seam under tension. Keep the approved drawing and sample identification with the purchase order.
For a purchasing request, send the annual forecast alongside the first release quantity for each specification, your delivery destination and your required arrival date. You can review TIAN FENG's bulk mattress bag terms or request a quote against a drawing. When the open question is how rolls dispense at the packing station, use the separate roll versus individual bag guide.

Questions buyers ask about mattress bag quotes
Can I convert a price per kilogram directly to a price per 1,000 bags?
For the goods alone, multiply the price per kilogram by the agreed net kilograms per finished bag and then by 1,000. Confirm that the rate covers bag conversion, seals and other specified operations. Add applicable packing, delivery and one-time charges on the same quantity basis.
Should I use the sample pass rate to adjust a supplier's bid?
Keep the quoted piece count as the denominator for the buying comparison. Report any sample failure separately and resolve it before placing the order. After delivery, actual counts, credits, replacements and acceptance records can support a separate cost per accepted bag.